spare & wear parts

True performance in today's industries operations is measured by getting the most out of the least. We understand the importance of adding the right resources, subtracting unwanted costs and dividing processes efficiently to multiply your profitability. We help lower total cost of ownership as well as reduce operating costs so you get a greater return on your investment. 

Multiply your profitability

Human powered

Best quality of service is powered by the best quality of people.


All the manufacturing process is done in the cleanest and more efficient way.

best practices

All the know-how from years is applied to the whole process.


Transported materials are often hot and extremely abrasive. This sets demands on the conveyor and most of all on the drag chain. By choosing the correct link and pin material, even the most abrasive and very hot (up to 600ºC) materials can be handled without problems. Forged links and connecting pins of drag chains are usually made of case hardened steel (cementation steel, 20MnCr5) or tempering steel (boron steel, 27MnCrB5). In special cases links or pins are manufactured of hardened stainless steel or heat resistant steel.We buy forgings only from reliable suppliers who are committed to provide us with flawless products as scheduled.

Odoo text and image block
Odoo - Sample 1 for three columns


Product specific downloads

Brochure  #1  Download
Brochure  #2  Download
Odoo - Sample 3 for three columns

All links are machined at Kopar workshop after which they are heat-treated by a sub-supplier.  Finally, the welding of flights and assembly work are carried out at our own workshop. In order to provide a quotation, we require the following information: chain type width of chain or width of conveyor type/shape of flight pitch of flights .

Odoo - Sample 1 for three columns


T-flight chain is suitable for horizontal conveying and up to conveyor width of 630 mm.

Odoo - Sample 2 for three columns


P-flight chain is used in inclining or vertical conveyors.

Odoo - Sample 3 for three columns


I-flight is a double strand chain, which is used in wide conveyors (500–1200 mm) and is most suitable for heavy transporting in demanding conditions.

DRIVE SPROCKETs and wheels


The sprockets manufactured by Kopar have tooth rims that are bolted to hub to make it possible to change the tooth rims without dismantling the drive shaft. Hub itself is fastened to the drive shaft by cottering and locked with a set of screws.
Tooth rims are made from abrasion resistant steel, (AR 500). Arrows showing the correct rotation direction are always marked to tooth rims. Tooth rims have also a split spot, in a correct place, to ensure succesful maintenance.
Odoo text and image block


Idler wheel is completely machined part assembled with adapted sleeve to idler shaft. A toothed version is also available.


Tail Sprocket rims are bolted to hub with a similar construction like that of the drive sprocket, so it is easy to change only the rims. Hub is fastened to tail shaft with adapted sleeve.
Odoo - Sample 1 for three columns

Elbows and pipes

Elbow and pipes are made from steel or reinforced by cast basalt / aluminum oxide. Reinforcement reduced the need for replacement parts and lengthen the life of the system when is used for very abrasive materials.

Odoo - Sample 2 for three columns


Kopar'sCupola Valve has an inflatable seal that made it completable gas tight, also it's equipped with a pressure switch that recognized the internal pressure of the inflatable seal and limit switch that cupola is closed.

Odoo - Sample 3 for three columns

Spare parts

Kopar’s range includes the best possible valves, switches, and all other components.

Contact Us

Inquiries regarding process systems and complete equipment packages: 

Inquiries for spares, wears and projects: 

Or call us directly +3583440180

Latest Posts

Back to Top